List Of Regulatory Items And the Relevant Authorities

R 1	Installation of gypsum board partition.	FSSD
R 2	Construction of mezzanine floor and storage platform	FSSD / BCA
R 3	Installation of raised floor system	FSSD
R 4	Replacement of existing entrance or exit doors (with new door design or with roller shutter)	FSSD
R 5	Closing up of existing entrance	FSSD
R 6	Installation of manual fire alarm system or hosereel including relocations / additions. (Endorsement of drawings by HDB not required)	FSSD
R 7	Installation of Sprinkler System and Automatic Fire Alarm System. (Endorsement of drawings by HDB not required)	FSSD
R 8	Installation of hydraulic car hoist, car-o-liner with hacking of floor slab (for car workshops)	BCA
R 9	Installation of gantry cranes / hoists	BCA
R 10	Installation of signboards and advertisement signs (Area more than 5 m2)	BCA
R 11	Installation of new floor trap, gully, grease trap	BCA / NEA
R 12	Installation of cooling tower	BCA / FSSD
R 13	Installation of spray painting booth	FSSD / NEA
R 14	Installation of flue chimney / vent pipe / exhaust hood (Kitchen Exhaust System) / Air-Conditioning and Mechanical Ventilation System which involves duct work	FSSD / NEA
R 15	Demolition of toilets / bin store (external or load bearing wall)	BCA
R 16	Installation of strong rooms / vault room	BCA
R 17	Construction of reinforced concrete trench (within premises)	BCA
R 18	Installation of retractable awning with cantilevered projection exceeding 3 meters	FSSD / BCA

Qualified Person (QP) is required to take note of the following:

a. The above list of Regulatory Items is not exhaustive and is subject to changes from time to time. It serves as a guide only. The QP is responsible to check with the Relevant Authorities on the details and requirements for the submissions of these regulatory Additions and Alterations works.

b. Tenants / lessees and the QP are required to comply with the Endorsement Criteria and General Conditions for Regulatory Items.